33rd
Annual
NIST Time and Frequency
Metrology Seminar
June 3 -
6, 2008
Schedule
Location:
OVERVIEW
The National Institute of Standards and Technology is offering a
comprehensive 4-day course on understanding the characteristics of clocks and
oscillators, making precise time and frequency measurements, and
synchronizing precision time systems.
The 2008 seminar will include the newly published
"Handbook of Frequency Stability Analysis" by Bill Riley. Also, new lectures will be included
in direct-digital PM noise measurements, how to specify frequency uncertainty, oscillator needs for
new radars and surveillance systems, GPS vs. other global navigation satellite systems, photonic (laser-based)
oscillators, chip-scale atomic clocks, femtosecond laser dividers, active PM-noise reduction techniques in
oscillators, millimeter-wave applications and noise measurements, and
ultra-low noise amplifier design techniques.
Notable 2008 lecturers include:
Jan Hall, winner of the 2005 Nobel Prize in physics
John Vig, 2008 IEEE President-elect
David Allan, creator of the famous Allan variance
The seminar's topics are:
Basic Definitions of Terms
- Frequency, Time,
Phase, Accuracy, Stability, Noise, Jitter, Standards, Calibration,
Traceability, Certification, Quality Assurance
- Time and Frequency
Fundamentals
Measurement Methods and Analysis of Oscillators, Synchronization Systems,
and Phase-locked Loops
- Digital Signal
Processing Techniques
- Frequency-Domain
Performance: PM and AM Noise Measurements of Oscillators and Amplifiers
- Time-Domain
Performance: Allan Variances, Total Estimators, and other Time and
Frequency Variances
- Characterizing Clock
Jitter
How to Collect, Analyze, and Interpret Real Data
- Measurement
Techniques and Analysis Examples
- How to Use Stability
Analysis Software (included in fee)
What You Need to Know about Oscillators and Frequency Standards
- Vibration,
Acceleration, and other Environmental Sensitivities
- Quartz Crystal Resonators
and Oscillators
- Atomic Standards:
Rubidium and Cesium
- Comparing Laboratory
and Commercial Frequency Standards
Testing Oscillators and Frequency Standards
- Measurements and
Instrumentation
- Digital and Analog
Approaches
- Demonstrations of Lab
Measurements
- Time Stability
- Frequency Stability
- Phase Noise and
Spectral Purity
- Jitter Analysis
Using the Global Positioning System (GPS)
as a Transfer Standard
- GPS
Time: What is it, How is it used, What is Typical Accuracy and
Precision
- Time and Frequency
Transfer Using Common-view GPS
for Highest Accuracy
- Carrier-phase
Common-view Time Transfer Using GPS
for Highest Precision
- Limitations of GPS
Synchronization
Special Time and Frequency Applications
- Two-way Satellite
Time and Frequency Transfer
- Synchronization in
Telecommunications Systems, Internet Time Service, Network Time
Protocols
- Emerging Frequency,
Time, and Synchronization Techniques on-chip (Chip-Scale) Cesium
Standard
- Optical Standards,
Laser Cooling, and Optical Frequency Division
- Future Applications
and User Requirements
Other topics will include introductory and advanced frequency synthesis
techniques, uncertainty analysis, applications in wireless cellular phones
and broadband telecommunications, and aspects of legal metrology, traceability,
ISO compliance, and laboratory accreditation.
This seminar is a must for planners, managers, scientists, engineers,
laboratory technicians, and educators involved in the use of time and
frequency systems. It presents techniques related to the analysis and
evaluation of oscillators and frequency standards. It is particularly
appropriate for those who are or might be responsible for certification of
oscillator performance at levels where traceability to national standards is
a useful part of this certification.
To see a sample of the types of time and frequency questions that are
answered at the seminar, go to our Example Seminar
Questions page.
FREQUENTLY ASKED QUESTIONS
What will I receive at the seminar? You will receive a
concentrated, 4-day course, lecture notes and reprints, a CD and a USB key containing
lecture presentations, lab demonstrations, metrology certificate of completion, the latest
version of STABLE for Windows (software for frequency stability analysis),
tour of NIST’s primary standards and research activities, an evening
reception, continental breakfasts, three lunches, refreshments, and a seminar
gift.
How much experience do I need to benefit from this course? This
seminar begins with the basics and proceeds to advanced topics by the end of
the week. Therefore, attendees of all levels of experience are welcome.
Is this a “hands-on” course? Yes. The seminar includes a full
afternoon of lab demonstrations at NIST. A morning is devoted to analyzing a
wide range of frequency and time stability data using STABLE for Windows,
which is provided for you. Interactive sessions throughout the seminar allow
you to ask questions to our expert lecturers.
REGISTRATION
The registration fee is $1700.
REGISTRATION DEADLINE:
U.S. Domestic Registrants: May 28, 2008.
International Registrants: May 20, 2008.
There are two ways to register:
1. If you are paying by credit card you can register online at
https://rproxy.nist.gov/CRS/conf_disclosure.cfm?CFID=230282&CFTOKEN=70465902&conf_id=2893
2.
Otherwise you can print out the registration form (pdf)
at
http://tf.nist.gov/timefreq/seminars/T&FRegistration.pdf
fill it out, and mail it to:
NIST/Finance
Division
100
Bureau Drive, Stop 3751
Administrative Building (101), Room A822
Gaithersburg, MD 20899-3751 USA
Or fax it to:
(303) 497-4305
Class size is limited. Attendance will be
on a first-come, first-served basis. Questions regarding seminar topics,
hand-outs, format, and participation should be
sent to:
Jennifer Taylor
325 Broadway, Div. 847
Boulder, CO 80305
phone: 303-497-3069,
fax: 303-497-4305
mcgeeja@boulder.nist.gov
Questions on
hotels, transportation, activities, and registration should be
sent to:
Wendy McBride
NIST-Conference Program Manager
325 Broadway, Div. 847
Boulder, CO 80305
phone: 303-497-4500, fax: 303-497-5208
wmcbride@boulder.nist.gov
LODGING
A limited
number of rooms are being held at The Best Western Boulder
Inn and The Boulder Outlook Hotel and Suites. Reservations
should be made early to ensure the group rate. Requests received
after May 03, 2008 will be filled on a space available
basis. For hotel reservations, please contact:
Best Western
Boulder Inn
770 28th Street
Boulder, CO 80303
Phone: 303-449-3800 or 800-233-8469
Fax: 303-402-9118
Rates: $93
+ 10.25% tax. Daily rate includes hotel's deluxe continental breakfast.
Boulder Outlook
Hotel and Suites
800 28th Street
Boulder, CO 80303
Phone: 303-443-3322 or 800-542-0304
Fax: 303-443-0397
Rates: $98
+ 10.25% tax.
Please mention
NIST TIME for the group rate.
Additional
visitor information is located at: www.boulder.nist.gov/visitor-info.htm
TECHNICAL CHAIR
David Howe can be reached by email: metrology@boulder.nist.gov
or by phone: 303-497-3277
If you would like to receive information on the seminar, please e-mail tfseminar@boulder.nist.gov and
type SUBSCRIBE in the subject line.
Boulder area maps,
directions to airport and information
Nistboulder.net Home Page
|
